Hi. I have a RPi running Venus OS temporarily since I can't get get Cerbo GX in stock just yet and would like to demo the system before I go to far. I cannot get the Victron Connect App to connect to the new VictronConnect-Configure feature they recentely released to fully control the devices remotely. It fails at 40% with error "MQTT-RPC Unable to connect to the RPC broker. Configuring the device is not possible. Error Code: 8"
-Venus/RPi connected to VRM and logging data every 15 min as expected
- Remote console is working as I can change *some* settings via the online portal
- VRM portal shows connection to Venus "Online" with green check mark
- Venus OS v2.54, 2-way VRM connection is enabled
- Using MPPT-->VE-direct cable --> USB converter --> RPi. Not 100% clear if this is supported
One of the big reasons I purchased this system is to remotely control a fridge connected to load of MPPT. I really need to know if this will work with Cerbo GX or if I'm dealing with some network issue which I am not sure how to debug