Hi,
I have Mutli plus 3000/48 V with a MPPT 150/70. Its connected through ESS and the charger setting is
- Absorption voltage is 57.60 and float is 55.20 (as per battery Manufacturer settings)
I have connected the BMV 712 through VE to the CCGX.
In the BMV 712 - what should my settings be for charged voltage? as per the manual it states that for 48V its recommended at 52.8 or the charged voltage parameter should be slightly below the end of charge voltage of the charger (usually 0.2V to 0.3V below the float voltage.
If I set it at 52.8V will it not contradict with 55.2 set in the ESS? Or
can I set it 55.0 as per the battery specs - less 0.2V
Thanks,
Noel