question

catraz avatar image
catraz asked

Multiplus update requires GridCode for ESS

I purchased the Mk3 to USB and once connected I updated my Multiplus II firmware. To setup the ESS assistant I needed to go back to VEconfig. The problem is that VEconfig now states there is a firmware difference and a grid code is now required to use export. Can you provide the Australian grid code? Thanks

ESS
3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Rob Duthie avatar image Rob Duthie commented ·

Hi

They won't give grid codes over this forum, your have to go to the dealer installer in Aussie.

Regards

Rob D

NZ

0 Likes 0 ·
catraz avatar image catraz Rob Duthie commented ·

Thanks Rob. I’m hoping it can be provided by PM. I’ve purchased most of the gear off eBay sellers and their names don’t match the dealers listed by Victron. I’ve asked the question to the seller, but I’d like to get the system functional ASAP.

Scott

0 Likes 0 ·
Rob Duthie avatar image Rob Duthie catraz commented ·

Hi Scott

If you get stuck email me on raduthie@gmail.com

0 Likes 0 ·
1 Answer
Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

Hi @Catraz

Officially, the next step is to fill out this form with your request - http://ve3.nl/help

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.