question

catraz avatar image
catraz asked

Multiplus update requires GridCode for ESS

I purchased the Mk3 to USB and once connected I updated my Multiplus II firmware. To setup the ESS assistant I needed to go back to VEconfig. The problem is that VEconfig now states there is a firmware difference and a grid code is now required to use export. Can you provide the Australian grid code? Thanks

ESS
3 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Rob Duthie avatar image Rob Duthie commented ·

Hi

They won't give grid codes over this forum, your have to go to the dealer installer in Aussie.

Regards

Rob D

NZ

0 Likes 0 ·
Show more comments
1 Answer
Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

Hi @Catraz

Officially, the next step is to fill out this form with your request - http://ve3.nl/help

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.