This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi there,
I just observed something strange: The Grid is Not connected But when I Turn on the Switch for the Ac Input there is 70volts ac on the AC IN.
An IF i do connect the Grid, the whole unit goes into alarm mode.
Does anybody have an idea or has Seen this behavior before ?
Hi @Faraday
Did you properly ground your inverter casing? and where are you measuring the voltage exactly?
Hi @Daniël Boekel (Victron Energy Staff),
I measure the voltage Right at the ACin 16A connector between L and N. Well, on the extension cable actually.
the casing is well grounded by using the proper bolt.
I did have the grid connected to the Unit but the circuit braker fuse Flicked - so I unplugged it and tried to find whats wrong. The Internal breaker did Not flick. Since then the Unit goes into Alarm (only Alarm LED on) - that state is not described in the Manuel unfortunately.
It is actually 72,5 V AC: 
and here is Video of what happens when grid comes in: Link to Video
Hi @Faraday
Can you please measure this at the terminals of the inverter?
Also please measure with the breaker open and input connected.
