To use this product on a motorhome with a manual battery parallel solenoid, is there a way to automatically disable the Orion whenever this solenoid is activated (+12V to coil)? I assume running the Orion with input/output shorted is unwanted. The Orion Manual mentions "remote ON/OFF" and "engine detection override", but no inhibit method. Looks like connecting L to +12V might do the job? Can I also use Orion ON by engine ignition +12V at the same time? I need to have orion in stand-by with no draw when engine is off.
Perhaps the logic of connections L and H should be fully explained.
