HI Sirs,
Is it possible to use CCGX and Venus GX in same CAN bus ?
I have CCGX in my system, but my 3rd charge controller is connected via VE direct to USB and there is black outs every now and then. Also I would like to add temperature sensors to my setup.
So, Idea is to add Venus GX and connect 3rd charge controller to Venus via VE Direct. ( = 2 separate GX units)
For this, I guess I need battery info from Pylontech via CAN bus also for Venus GX, right ?
For monitoring I have to monitor these GX devices independently, OR use Grafana for monitor these units at the same time.
Thanks :)