question

bryantroll avatar image
bryantroll asked

Cannot access "D" in programming menu of BP100 Battery Protect -- Cycles A, B, C, then back to A again

Hello,

I am trying to display / reset my system voltage on my Battery Protect 100 and am able to cycle through the programming numbers 0 through 9, and then letters A, B, and C, but it does not display D (it just goes back to A again). Can't figure out what I'm missing. I just want to confirm it is set to 12v and that everything is configured correctly because I am having an issue with an E1 error code on the unit and am trying to troubleshoot any possibilities.


Thank you,

Bryan

Battery Protect
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
bryantroll avatar image
bryantroll answered ·

any help? thanks!

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Victron BatteryProtect product page

Additional resources still need to be added for this topic