This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
How do I remove the unused or disconnected devices from my Remote Console device list.
There are four Fuel Tank numbered (1) to (4) which I do not use,
and four Battery Temp Sensors .
I have a Cerbo GX
Can these be removed from the list if not used?
Thanks
Hi @JaaksZA,
You can disable these by going to the bottom of the menu Settings -> I/O and then turning off Analog and Digital Inputs.
Then restarting your Cerbo GX - in the Settings -> General -> Reboot
@Guy Stewart (Victron Community Manager)
Thank you very much for the quick response. My console is looking much better now. I did spend some time trying to get this sorted out myself, but did not really find the information easily or at all. Good to know there is a useful forum for this! Will share my knowledge as much as I can
Thanks @JaaksZA
You are right, it is a bit tricky to find. There are still some adjustments to be made to the default behaviour to make things the easiest for the most people out of the box.
