question

Kirk B avatar image
Kirk B asked

Bluetooth Dongle & VE.Bus Smart Dongle Low Temperature Cut-off

Building a small system with a Multiplus 3000/24, Bluesolar 100/300, BMV 700, and two lithium batteries. I’d like to implement low temperature cutoff for the system. The bluesolar is NOT a smart / Bluetooth enabled controller.

Question: If I add a Ve.Bus smart dongle to the multiplus and Bluetooth dongles to the BMV and Bluesolar, will that provide the infrastructure to enable low temp cutoff for both the Bluesolar and the inverter?

Thanks!

Kirk

Bluetoothtemperature
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
ejrossouw avatar image
ejrossouw answered ·

@Kirk B The VE.Bus smart dongle cannot be used in a smart network at this time. You can basically use it with the VictronConnect app, which is well documented.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic

VictronConnect bluetooth troubleshooting guide