question

plinky avatar image
plinky asked

12v campervan set up help

Hi,

I have a 250 watt single solar panel and victron 100/20 smart solar mppt going into 2 x leisure batteries (12v set up) in my campervan.

1. Is it correct to connect the earthing point on the side of the controller to the negative terminal of my leisure battery....

2. I am using the controller with victron app on my iphone.....the controller came with the jump pins 2 and 3 connected (using the connecting block). Is that the best location for normal use with my set up?...


Many Thanks

smart solar set-up help
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
markus avatar image
markus answered ·

Hi,

1.) yes, this can be done, but I think it is not necessary.

2.) this jumper is for configuring the disconnect and reconnect voltages of the load output terminal of the charger, you can configure this settings in the victron app too, but you should remove the jumper then.

Regards,

Markus

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

plinky avatar image
plinky answered ·
Thanks Markus, appreciate the reply. Regards, Ivor
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic