This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have ESS with Multiplus 2, Solaredge inverter on AC-In. I use external bms for over and undercharge protection of cells. I use two signal bms setting on aux1 and temp input. All works, the bms opens the relay because of under voltage and the inverter switches off. Perfect, but the charger switches on by full power at this cell undervoltage alarm from the bms which is not intended. I don’t want to charge from the grid. At undervoltage only the inverter should be switched of.
@gnagflow What are your batterylife and sustain settings? If the former is enabled,
Hi, thank you for your help. I don’t use the batterylife function it is disabled. Minimum SOC setting is 0%. In Winter I Switch it manually to 20-30%. I use the battery pack cells from 3.3V - 4V.
The sustain setting is at 45V, when my two signal bms tells the victron under voltage at cell (by manually disconnecting the relay) it can be at any voltage (tried it at >50V) and it charges at full power, even if it should only disable discharge!
Do you have any idea why this action?
Thx a lot
