question

natebert avatar image
natebert asked

Ve.Bus RJ45 cabling order

Is there a proper order for cabling the following Ve.Bus devices?
(Usually with a 'bus' order doesn't matter.)

DMC GX (required for current limiter when using a Ve.Bus BMS)
Ve.Bus BMS (required for Victron SmartLithium batteries)
Ve.Bus Mains Detector (to allow for DC start when AC is present)
Inverter/charger 1 (split phase)
Inverter/charger 2 (split phase)
CCGX

In a full Ve.Bus chain of devices, the Ve.Bus BMS manual suggests that there is a preferred order (page 4): https://www.victronenergy.com/upload/documents/Manual-VE-BUS-BMS-EN-NL-FR-DE-SE.pdf


This leads me to believe that there is a required Ve.Bus order of devices which with this equipment list would be:
DMC GX -> Ve.Bus BMS -> Mains Detector -> Quattro1(leader) -> Quattro2(follower) -> CCGX

Can Victron confirm this order requirement?

I guess this leads to a bunch of other related questions such as:

Do the specific ports on the Ve.Bus BMS have to be used as labelled?
Remote to DMC GX, and Ve.Bus to the Mains Detector, before the Inverter(s)?

Is there some unspoken addressing conflict if these are wired out-of-order?
Is it that the DMC is on the same address as the CCGX, where we are hiding the DMC behind the Remote port on the Ve.Bus BMS is required?


The DMC manual seems to suggest that you can connect it directly to an inverter which indicates its a Ve.Bus Device, but the Ve.Bus instructions indicate otherwise.
https://www.victronenergy.com/upload/documents/Manual-Digital-Multi-Control-GX-Panel-EN-NL-FR-DE-ES.pdf

Thanks,
Nate

MultiPlus Quattro Inverter ChargerBMSCCGX Color ControlVE.BusDigital Multi Control
capture.png (169.9 KiB)
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
ejrossouw avatar image
ejrossouw answered ·

Hi @natebert I am not sure I see the relevance of these questions given the Victron tested/ supported connections are quite clear. Why do it differently? Maybe I am missing something?

3 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

natebert avatar image natebert commented ·

I thought it would be pretty self evident to use it like a bus architecture. In a communication bus, order usually doesn't matter, especially since its called a 'Victron Energy Bus'. Victron is often referred to as a greener company and using an optimized order would save on cabling lengh and materials. I'd like to be able to simply run the shortest route for each device vs having to pull cables to meet a specific order, which is then more of a point to point connection method.


0 Likes 0 ·
Show more comments