Any possibility to disable ac-loads, as we want to have everything on critical-loads?
regards,
Andreas
asked
Disable showing of "AC-Loads" in cerbo
I have both AC1 OUT and AC2 OUT connected, in the CCGX, all AC loads are displayed as one total
Even if all loads are connected to AC out2 the tab AC-Loads is shown in Console.
For clearification: Thats what i want to "disable" like it can be done with the critical loads
I would like to disable L1 & L2 inside that box, since there is _nothing_ on them, but for whatever reason Venus keeps showing load on them (rounding errors from PV/Grid/Consumption?)
Finally, solution was to disable smartmeter (let multiplus do the measuring).
That's possible as everything is behind the multiplusses...
Btw. got rid of the grid-setpoint-lag with this :-)
Ok, I happen to see this post and did as @N-DEE suggested and disabled the Grid Meter. While I was at it I (1) changed the name and (2) the color of the OverviewHub.qml entry to the following and now it looks like what I think you wanted. I haven't spent time on this so with the next upgrade the change will be gone but it was something I toyed with just for fun.
