Hello community,
Orion-Tr Smart 24/12-20A (240W) Isolated DC-DC converter: External Fuses
I am confused about external fuses required in a system with the above device.
The spec shows 25Amp maximum current under nominal operating voltage and 50Amp short circuit on the 12V output channel.
But the fuse advice in the manual is for 30 amps on the 24V channel and 60 amps on the 12V channel - surely these are too high?
I am specifying the integration of this component and am looking at advising 25Amp (24 volt channel) and 50Amp (12 volt channel)
Any confirmation would be appreciated.
Andy