Hi,
Bought into Victrons sales speech for Easysolar 12/1600 product for a van project, but it seems some things still remain unanswered. I've read the manual and done the search. This setup will be used year round in different locations, some shaded some not and temperatures will vary mostly between -5 to +25 celsius. I will be living off-grid full time in the vehicle, so i opted for what i believe is a quality product from a European manufacturer, and i really want to like it.
Being that solar power is somewhat of a new option in the energy market (for the average consumer i mean) and it's popularity will grow together with the advance of battery technology. I find that that the manual and available information for a product labeled as Easysolar is lacking. I really think Victron is on to something here, but the documentation needs to be improved.
Ranting aside, to avoid frying my expensive gear and to get this right the first time, i have come here at the fountain of knowledge to be assisted and educated. So please take time to read this post thoroughly.
My setup will be:
Easysolar 12/1600
https://www.victronenergy.com./inverter-charger-mppt/easysolar#pd-nav-image
3x GWL SunnyPoly 165w panels
12v 260ah LiFeYPO4 winston battery with BMS123Smart for monitoring (link is to 200ah battery, otherwise specs should be similar)
Now for the list of actual questions:
1. Series or parallel panel wiring:
-I am under the assumption that parallel wiring would be better for shaded areas, but series better for more challenging conditions. So far I'm going for parallel wiring, will this work? Do i have enough voltage coming out of the paralleled panels to charge my system when in less optimal conditions? Is there a reason i should consider series?
2. If wired parallel, where to connect:
-there are inputs for 3 strings of panels on the Easysolar, is there a difference whether i connect the panels parallel in the roof and come down with one set of connectors and wires or is it better to wire and connect all 3 panels separately? I am inclined to wire them separately just because it would seem more serviceable and more robust to have less connectors and all 3 panels having their own set of cabling all the way from panel to the CC, this make any sense?
3. Inverter/charger settings
-i do not have any kind of color control monitor or such, i only have one VEdirect to usb -cable which i gather is not compatible with the inverter/charger portion of Easysolar but would need a VEbus to usb cable(?). However, when i check the manual page 16 for the table for dip-switch operable voltage settings - there is no setting for lithium batteries to be found at all? What settings do i NEED and HOW to set them now (with either dip-switches or by acquiring the VEbus-cable)?
4. Charge controller settings:
-now this one seems to have a rotary selector for LiFePO4, so that's something that is finally Easy as the name suggests. Apart from flicking the switch to seven is there any additional settings i NEED to change in order to keep my battery healthy? I quess this would be done with the VEdirect to usb cable and a computer then?
5. Is there anything else i need to reconsider before going with this setup?
-i've already acquired the gear mentioned above and will install these in the coming weeks. This will be the single most important aspect of my van, so i would like it to work since it will be a pain in the ass to redo once the project is finished.
Thank you for reading this far, please reply if you have an answer to one of my questions.
-miikka