Hi everyone,
Just bought a Victron SuperPack 12,8v 100Ah battery, this battery has the BMS integrated this is the reason why I chose it.
This battery will be installed in my camper van as a leisure battery, but a big question question come to mind, will my 140A alternator sustain the charging load.
From the battery's technical datasheet, it only pulls up to 50Amps when charging, but is this really the case ?
Since this battery has a BMS of its own, does it control the current pulled when charging ?
Can this limited charging current be set in the battery's BMS via the mobile app?
Will I need a DC to DC charger in-between the alternator and the battery ?
By the way, the alternator is a Valeo 439753 which is regulated and I currently have an 80Ah battery as my main battery and also a split charger relay.
Thank you in advance for you response
Philippe