Dc coupling off grid without monitoring

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

allam-salam asked May 17, '20

Is it possible to make a system with quattro and 3 MPPT without gx devices?. and how will it work?

offgrid

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2020-05-17T10:54:29Z

Paul B answered · May 17, 2020 at 10:54 AM

Yes it is possible, Its a lot harder than with a GX device thats all

you would need a MK3 unit and you can set it up using VE config and then setup the assistants, if needed,

2

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

allam-salam commented · May 17, 2020 at 11:15 AM

Thank you

So, it will charge the batteries and sup3the loads?

0 ·

Show more comments

Answer 2 · 2020-05-17T20:47:45Z

Daniël Boekel (Victron Energy Staff) answered · May 17, 2020 at 08:47 PM

Yes this is no problem, GX device just makes monitoring easier and provides some extra options.

Only when you have 'managed' batteries with CANbus bms communication to the Victron system, you need a GX device.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.