This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I'm using a CCGX to start the generator on serveral conditions, low SOC, high DC current, inverter (pre)overload and AC Load. I want to reduce generator running hours and want to be able to see what condition and with what value triggered the autostart. Is this possible in any way? Either direct in the CCGX or in the VRM portal?
Hi Yannick, yes it is,
in the advanced tab, you can add the generator state widget. It should show you what you want. This is on the VRM portal. It will look like below:
That's what i'm looking for! But i can't find it on my VRM....
This is what my options look like,
Hi @Yannick
What firmware is your CCGX running?
Hi @Daniël Boekel (Victron Energy Staff)
I'm running 2.23 on the ccgx
Try to update it to latest version (I think 2.53?), that should fix it.
That's it! Thanks!
