Hi Victron gurus,
Any suggestions on how to fix 2 x solar regulators connected via VE.Can to a CCGX dropping out? There is a VE.Can terminator installed at the end as well. Resetting the CCGX did not bring it back.
Thanks
Johnson
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi Victron gurus,
Any suggestions on how to fix 2 x solar regulators connected via VE.Can to a CCGX dropping out? There is a VE.Can terminator installed at the end as well. Resetting the CCGX did not bring it back.
Thanks
Johnson
@Johnson Lee You need TWO terminators and also make sure the ports settings are configured for 250kbps. Also reference the GX or devices themselves and check the codes against the manual.
16 People are following this question.