I have a 3600 Multi II with a VE.bus BMS and 3 Victron Lio batteries. Configured them all with the config program and let all the defaults be after I changed the battery type to Lithium. Lio Assistant is loaded. Plugged in shore power and the batteries charged happily for an hour or two and then stopped charging. The red 4 cell volt/temp LED is lit on the BMS and the batteries report charge disable in the iphone victron connect app. The cells are all under 4 volts (well under) but the temps on the batteries are 25C. Is 25C the max charge temp? If not how do I convince the BMS to charge them once they hit 25C?
Thanks