question

whnz avatar image
whnz asked

Feature Request : Public IP Address of Venus shown in VRM

VRM shows already the LAN/WiFi Address of the Venus device (in the device list), It would be good if it could also show the last public address as seen by VRM.

Help a few use cases for remote access type things on dynamic IP address internet connections.

feature request
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Kevin Windrem avatar image
Kevin Windrem answered ·

You could use port forwarding and open up ports 80 and 81 for your use from the outside world.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

whnz avatar image whnz commented ·

yes, but that doesn't diminish this could be a useful feature. VRM likely already has this data, just needs to display it :)

0 Likes 0 ·
Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

Hi @WHNZ,

You can find this information by adding the suffix /diagnostics to the end of the VRM site, then search for the attribute Remote ip

https://vrm.victronenergy.com/installation/xxxxx/diagnostics

(replace xxxxx with your 5 digit site).

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

The feature requests topic tag can help Victron R&D find feature suggestions for products. 

There are many factors that go into the Victron product roadmap, and feedback from end-users can help.