question

christofferbengtsson avatar image
christofferbengtsson asked

Access point option missing, Venus OS Raspberry Pi B3+

Hi all,

I hope this post is in the correct space.

I have just finished installing the Venus OS on my raspberry and getting ready to connect it to my off-grid solar installation. Currently I don't have internet available so I would like to access the Raspberry locally. However - when searching for the access point in the WIFI list on Iphone I do not see it. It seems like on the regular GX models that a "Create access point" option available under Settings → Wi-Fi → Create access point. This does not seem to be available on the raspberry pi? Is there a fix for this? Currently I have no way to access the unit unless I bring it to a location with a LAN connection since it won't auto-connect to the hotspot on my phone when available.

Thanks a lot!

Best Regards
Christoffer

Raspberry Pi
2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Rob Duthie avatar image Rob Duthie commented ·

Hi

The only way to access it, is to plug the lan connection into a WiFi router and access that way.

Regards

Rob D

NZ

0 Likes 0 ·
gazza avatar image gazza commented ·

Hi Christoffer

Did you ever solve your access point monitoring of the Venus OS on the Raspberry pi set-up? If you didn't I have come up with a cheap ESP8266 workaround to create a local network without LAN connection or additional router. Let me know if you are interested. Regards



0 Likes 0 ·
5 Answers
pagedo avatar image
pagedo answered ·

Just bought a Victron 712 Battery Monitor 5 weeks ago and was plesently surprised that there was a connection with the Raspberry Pi. I have been working with Raspberry Pi devices configured as various servers for the last 7 years - mainly with the Debian images and Ethernet connections to a Home router, not the Busybox image with WiFi.


The first thing I wanted when I got the Venus Pi up and running was it to be configured as an Access Point for when I am outback and I want to check the state of my battery and what has happened to it over the last 24, 48 hours etc.


I found quickly that if you installed hostapd, the Access Point option is visible and available - it just doesn't work. After a lot of messing around with wlan0 configurations, hostapd cofigs, dnsmasq configs and uhcpd configs a couple of times I actually got the PI up as an Access Point just for it all to stop as soon as I rebooted. After many fresh starts with the Venus Pi V2.60 image I started to hone in on what was included in Busybox and I came across connman.

Things really started to change when I issued the command:


$> connmanctl enable wifi


After a bit more investigation I came across:


$> connmanctl tether wifi on <SSID> <passphrase>


and that is all you really need.


The downside is that I have yet to find a way to specify with connman the Access Point's address, netmask, network and the IP range you want to set. It has defaults of 192.168.1.1, 255.255.255.0, 192.168.1.0 and I guess a range of 192.168.1.2 to 192.168.1.254


There are a couple of other configs you should do as well to ensure teathering is persistent across reboots.


This is what I have done to a brand new install of the

venus-image-raspberrypi2-20210215153610-v2.63.rootfs.rpi-sdimg.zip


From the Web browser from the clean install:

===============================

Settings > General > Access Level >

Superuser

Settings > General > Set root password >

1234567

Settings > General > SSH on LAN >

<ENABLED>

Settings > Firmware > Online updates > Check for Updates >

<PRESS TO CHECK>

Settings > Date & Time > Time Zone >

<COUNTRY> >

<TZONE_REGION>

Settings > General > Reboot? >

<PRESS TO REBOOT>


From a Terminal session accessed via SSH:

============================

$> connmanctl technologies

$> connmanctl enable wifi

$> connmanctl tether wifi on VENUSAP 1234567

$> connmanctl technologies


$> nano /etc/connman/main.conf


TetheringTechnologies = wifi

PersistentTetheringMode = true

AddressConflictDetection = true



1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Ronald Rink avatar image Ronald Rink commented ·
Works on a Raspberry PI 2 with an Edimax EW-7811Un LAN adapter as well (tested with Venus OS v3.00). Note: I had to reboot before I could connect to the hotspot.
0 Likes 0 ·
kradenko avatar image
kradenko answered ·

Hi,

I am sitting with exactly the same problem. Have you found a way to make it work?

Kind Regards,

Davin Hansen

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Rob Duthie avatar image Rob Duthie commented ·

The simple solution i found is to use a old spare WiFi router and plug the raspi Ethernet port into it and use the WiFi side to receive the data anywhere on a phone tablet etc.

Regards

Rob D

NZ

0 Likes 0 ·
jwfrary avatar image
jwfrary answered ·

@Kradenko @ChristofferBengtsson Did you find a way to get this to work? _ I was hoping to do the same!

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

kradenko avatar image
kradenko answered ·

Hi jwfrary,


I got my answer on the github page. Even though the you can simultaneously create a hotspot and have it as a client the Victron team don't allow it for some reason.

I have attached their response below. Let me know if you have success with making it work.

https://github.com/victronenergy/venus/issues/713

Regards,

Davin

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

gazza avatar image
gazza answered ·

Hi Christoffer

Did you ever solve your access point monitoring of the Venus OS on the Raspberry pi set-up? If you didn't I have come up with a cheap ESP8266 workaround to create a local network without LAN connection or additional router. Let me know if you are interested. Regards


2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

matthew-burga avatar image matthew-burga commented ·
Hey gazza, I'm interested in the workaround. I'd like to be able to access remote console when I'm away from my home router. I'm running headless for the forseeable future. Any info would be greatly appreciated. Thanks.
0 Likes 0 ·
Show more comments