question

Dave Rae avatar image
Dave Rae asked

Do I need a Lynx shunt with Pylontech batteries?

Hi, I'm installing pylontech batteries and ccgx color control.

Multiplus 2. 48/5000...

I have a lynx shunt, is that still worth installing and interfacing with the ccgx ? Will that clash with the pylontech bms?

Or just stick with the pyramid bms....

Thanks for any advice.... Dave...


lynx shunt
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
mvader (Victron Energy) avatar image
mvader (Victron Energy) answered ·

Hi, I recommend to leave the Lynx shunt out.


it can indeed clash on the canbus when share with the Pylon, and there are more issues.

Lastly, you dont need it. Adding a shunt next to a managed battery like Pylon, even when on separate canbusses, is something we advise against.

14 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Dave Rae avatar image Dave Rae commented ·

Thanks for your quick response appreciated....

0 Likes 0 ·
Cansin Sari avatar image Cansin Sari commented ·

Hey short question,

Can I see the voltage current soc of the batteries without the shunt, only with pylontech BMS?

0 Likes 0 ·
mvader (Victron Energy) avatar image mvader (Victron Energy) ♦♦ Cansin Sari commented ·

Hi! Please read the victron / pylontech manual

0 Likes 0 ·
Show more comments
seb71 avatar image seb71 commented ·
Adding a shunt next to a managed battery like Pylon, even when on separate canbusses, is something we advise against.

Would that advice also apply for a SmartShunt/BMV (which uses VE.Direct to connect to the GX device)?

0 Likes 0 ·
Cansin Sari avatar image Cansin Sari seb71 commented ·

+1

0 Likes 0 ·
Show more comments

Related Resources

Lynx Shunt VE Can online manual


Additional resources still need to be added for this topic