Hello,
Is it possible to connect two 24VDC chargers in series to charge a battery bank at 48VDC?
There are apparently no 48VDC chargers with Universal input of 90-265V, 50/60Hz.
I thank you in advance for your assistance.
Regards,
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello,
Is it possible to connect two 24VDC chargers in series to charge a battery bank at 48VDC?
There are apparently no 48VDC chargers with Universal input of 90-265V, 50/60Hz.
I thank you in advance for your assistance.
Regards,
I would not try it, as modern chargers use algorithms, which will not suit your battery's
Harold
Hi Harold,
Thanks.
Would you know of an alternative way to charge a 48-volt battery bank with a universal AC voltage input?
Additional resources still need to be added for this topic
Additional resources still need to be added for this topic
12 People are following this question.
How can Multiplus 1 be used to increase charge power in ESS system with Multiplus 2 and GX
Charge rate limited by Victron charge algorithm on flow / high impedance batteries?
Why is my Quattro sending 30.07 volts to my 24 v batteries???
Has anyone connected a solar panel with an optimizer to VE.CAN charge controller?