This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello, I'm interested in AC coupling our grid tied solar system with a Victron Quattro 48/15000/200-100/100
System specs:
Solar array is 72 panels with 72 enphase M215 microinverters all in parallel
Each microinverter produces 240V @ .9amp each at 60Hz
Peak kW is usually 15kWp, occasionally 16kWp
Can the quattro handle all of that PV? Thanks for your time and help.
Hi @Bishop8,
That should be fine. Though I can't say with absolute certainty because there are other elements of the system that would also influence the stability of the system such as battery size, battery type, and nature of the load.
Please read this document for some more detail on those limitations;
https://www.victronenergy.com/live/ac_coupling:start
There is also the Online Training course in Victron Professional that should be completed before undertaking something like this:
http://professional.victronenergy.com
Note as well that Enphase is not listed as a tested configuration by Victron. I have heard of success stories, and also people getting a customised configuration (grid profile) from Enphase to help with compatibility and stability from their system with the frequency shifting, so that it does what is expected.
Hello @Guy Stewart (Victron Community Manager),
Thanks so much for the response. We plan on having a 48V LiFePo4 battery with 30kwh. Nature of the load would be powering our house that uses approx 40kwh daily. I'll definitely take the online training course - thanks for the heads up.
