This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Good day
For some reason I have lost the option to connect to a site by selecting Remote Console. I have used it three days ago , but the option is not on the dropdown list of the site anymore .
Would there be any specific reason for this .
Regards
Johannes Cronje
HI @Daniël Boekel (Victron Energy Staff)
Can you please help . Site Chris Lourens
As above something went wrong . The colour control was set to update to the latest release candidate and this morning something went terrible wrong. I could not connect the color control as the Remote console was not available, I manage to get to site and find aout that the colour control went into default , I had to set up everything from scratch. the firmware is updated to V2.60-15 . There was some issues previously with this site and therefore the reason it was set to release candidate . It was never put back to just "latest release"
The inverter totally disconnected from the grid .
I am on site and had to set it up all over . The color control also does not want to pick up my SMA Inverter it did so previously . I did a hard Reboot and the Colr control simply went back to default again .
Will it be anyway possible to have a look at this urgently.
Regards
Johannes Cronje
Please post this in the correct section: modifications.
I'll move this post for you.
Running automatic update to release candidate is very risky and not advised for production systems.
