question

lauri-jalonen avatar image
lauri-jalonen asked

How to enable MQTT on Raspberry installed Venus OS for Raymarine integration?

Hi,


Just get Venus OS working on my Raspberry. Next step is get it working with Raymarine Axiom MFD, like presented here: https://www.victronenergy.com/live/venus-os:mfd-raymarine


How I can have MQTT service selection available on my Raspberry Venus OS?

Raspberry PiMQTTraymarine
1587500351573.png (37.3 KiB)
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Guy Stewart (Victron Community Manager) avatar image Guy Stewart (Victron Community Manager) ♦♦ commented ·

What version of Venus are you running?

0 Likes 0 ·
1 Answer
lauri-jalonen avatar image
lauri-jalonen answered ·

Sorry, I was looking it from wrong place. Found it now. Thanks anyway!

Lauri

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

simont avatar image simont commented ·
Hi Lauri, I was going to try the same thing. Can you connect the raspi to n2k using the Ethernet adapter?

Thanks!
Simon

0 Likes 0 ·

Related Resources

Additional resources still need to be added for this topic

Additional resources still need to be added for this topic

Raspberry Pi running Victron’s Venus firmware - Blog Post

Venus OS Large image: Signal K and Node-RED - Install

raspberrypi install venus image


Victron MQTT readme