question

Geoffrey Schwark avatar image
Geoffrey Schwark asked

Quattro 12v 5kw Orion 2 jr bms

I am asking the community if anyone is using the Orion bms 2 jr in their inverter setup. I know it works well with the can bus on the Quattro from what I have read. Trying to validate if it works well from someone with experience of this specific bms integration. Thx

BMS
1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Justin Cook avatar image Justin Cook ♦♦ commented ·

Moved to "Modifications Space" for discussion regarding non-supported systems and components.

0 Likes 0 ·
3 Answers
chris-knauf avatar image
chris-knauf answered ·

Did you ever get any clarity on this? I am trying to integrate a Phoenix inverter into my Orion Jr's CAN network and think I need some sort of gateway...

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Geoffrey Schwark avatar image
Geoffrey Schwark answered ·

Chris,

no I did not and based on some info I got from another engineer I went with a less expensive BMS that is not can integrated.

good luck.

Geoffrey

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

cinergi avatar image
cinergi answered ·

I'm successfully using Orion Jr 2 with my split-phase quattro setup & cerbo gx. The cerbo is required because that has the CAN bus on it (the quattro's don't).

7 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

djingis avatar image djingis commented ·

How much data from the Orion BMS can you see on the Cerbo GX? Are you able to see individual voltage of each cell?

0 Likes 0 ·
Show more comments