question

Paul B avatar image
Paul B asked

3 x Quattro 48/15000 with ess

Hi This sites FW is 469 its 3 x Quattro 15Kw units setup as 3 phase L1 L2 L3

The GX is on Fw 2.53

have been looking at a remote site and I see that the ESS assistant needs updating

I have now updated the ess to all 3 units L1 L2 and L3 using the remote VRM download Ve config

I then upload the new updated file via the VRM upload

however when I re download the setup file to doudle check I find that L1 has indeed been updated to the latest ESS assistant.

But L2 and L3 still have the old ESS Assistant as I get a warning that these assistants are out of date.

I did this twice and made sure all had been updated L1 L2 and L3 but same issue L2 and L3 are not updated.




ESS
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Daniël Boekel (Victron Energy Staff) avatar image
Daniël Boekel (Victron Energy Staff) answered ·

Hi @Paul B

is it ok if I try the same, so I can report it to the correct people if I can reproduce it?

if so, can you post the site name / id (private)

3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Paul B avatar image Paul B commented ·

Hi Daniel, did you find out whats the cause yet

0 Likes 0 ·
Show more comments