This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi. I am trying to use the relay K2 to drive a contactor based on SOC. I would like the relay to also switch on based on any AC input but it isn't switching on when AC is available and the SOC is below 80%. It will only switch on when the battery has charged to 80%.
I struggle with the AND and OR logic also.
Can you make 2 Assistants (1 switch on at AC, 1 switch on at SOC)
Hi Harold. I have tried that but the switch relay off assistant seems to take preference over the switch relay on. I put the switch relay on when any AC input is detected at the top of the list but still doesn't work.
Also have a look at the Generator Auto start Assistant. This may be easyer to use for SOC and has a lot of other options.
you could also still use the other assistants in order
I am referring to use this to turn the relay k2 off and on under SOC conditions.
