This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello all
System on my boat: Multiplus 12/1600/50, Venus GX, BMV-712 smart, digital Multi Control, Orion DC-DC, 4 x Victron 90 amp LifePo4 batteries.
I would like to be able to control settings (not on/of/charger only) in the Multiplus, via VictronConnect, either via Smartphone or Ipad. Having to connect a PC or Mac via mk3-usb interface is cumbersome!
Would VE.BUS smart dongle be of help?
I have all the latest firmware as per today.
Thanks in advance.
Anders
ATM a Multi can not be configured via BT.
The VE.Bus Smart dongle can only read current settings, change the input current limit and switch the device on/off/charger-only/inverter-only.
You have a venus GX so connect to the VRM and use this (see screen shot) and downlod the multiplus setup and then change it and upload it
drawback you have to be on the internet and the venus MUST be connected to the net
https://www.victronenergy.com/live/vrm_portal:remote-veconfigure
3. Two way communication must be enabled
;)
Dear all
Thanks for replies.
summary: changing setting Will require a pc or Mac.
not possible via iPad or smartphone.
hmmm!
Cheers.
anders
