question

johannes-cronje avatar image
johannes-cronje asked

Quattro does not want to switch on

HI

Quattro 10000/48 with color Control and Smart Solar 250/100.

The Quattro has switched off and I have struggled to get it on again .

The Color control is connected on the battery terminals of the Qauttro and the battery measures 53V on the Terminal.

After several attempt's by disconnecting the batteries the Quattro fails to switch on . I took a chance and disconnect the color Control from the inverter . The Inverter did switch on thereafter and I have connect the color control back on and all seems to be fine .

ANY REASON WHY THIS HAS HAPPENED ?

Regards

Johannes Cronje

MultiPlus Quattro Inverter Charger
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Riaan Barkhuizen avatar image
Riaan Barkhuizen answered ·

Hi @Johannes Cronje

What is the battery specification? This is typical of a system where the battery is too small to handle the inrush currents.

Best regards

Riaan

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

johannes-cronje avatar image
johannes-cronje answered ·

HI @Riaan Barkhuizen

The site uses Trojan IND13-6V Batteries for backup Power . Set to ESS keep batteries charged .

Regards

Johannes


2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Riaan Barkhuizen avatar image Riaan Barkhuizen commented ·

The battery you have should be adequate amps to start the Quattro.

0 Likes 0 ·
Show more comments