question

Robert M.O. Seidel avatar image
Robert M.O. Seidel asked

No second AC out on Multiplus 24/3000/70/16

I just had to find out that I had installed a Multiplus 24/3000/70/16 at a customer that had no second exit. I did not pay attention because it was not a topic so far. Now my question. How long has there been a second exit on this model? I suspected that the dealer had turned on an old model to me. Is it possible that it's a demo model or something?

MultiPlus Quattro Inverter Chargerac out 2
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

I never saw a MultiPlus 3000VA (or more) without the 2nd AC OUT.
Do you have some pictures?

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Robert M.O. Seidel avatar image
Robert M.O. Seidel answered ·

mp-yaka.jpg (60.3 KiB)
11 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Matthias Lange - DE avatar image Matthias Lange - DE ♦ commented ·

Do you have/can you make a picture without the front plate?

0 Likes 0 ·
Robert M.O. Seidel avatar image Robert M.O. Seidel Matthias Lange - DE ♦ commented ·

Yes tomorrow. What is also interesting is that it is in the
remote control does not have a second output.

0 Likes 0 ·
Matthias Lange - DE avatar image Matthias Lange - DE ♦ Robert M.O. Seidel commented ·

That is normal, AC OUT2 is not shown there.

But what I just noticed at the picture above is that the schematic on the front plate (next to the charger LEDs) is no AC OUT 2...

Also take a look at the serial number, should be on a sticker inside on the left or right side.

0 Likes 0 ·
Show more comments
Robert M.O. Seidel avatar image Robert M.O. Seidel Matthias Lange - DE ♦ commented ·

@Matthias Lange - Service Team Döbeln DE. The pics from inside and serial nr.

0 Likes 0 ·
mp-conections.jpg (3.0 MiB)
mp-serialnr.jpg (2.4 MiB)
mp-inside1.jpg (3.4 MiB)
Guy Stewart (Victron Community Manager) avatar image Guy Stewart (Victron Community Manager) ♦♦ Robert M.O. Seidel commented ·

That is normal, I can see the ACout2 connection in your images. ACout1 and ACout2 share a common neutral connection in that model which makes it a bit harder to see.

You can see a clearer picture of the Line for ACOut2 here:


The screen printing on the front missing the output is a mistake though.

0 Likes 0 ·
Show more comments