This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
hey people
I have an installation with 8kVa Quattro and 8kW Fronius with CCGX. The installation was off grid in Nigeira but now I am getting grid connection. However the grid connection is rural, it was unstable and power can be turned off for days.
In this situation the grid may be off for days, is the ESS still the assistant to use. If the the grid connection is there but no power also potentially no voltage. I am unsure if the ESS will still increase the PV inverter frequency.
Any thoughts?
Hi @tunde-olaoye. The ESS assistant does apply frequency shifting when the grid has failed, and as such should be fine for your application
Someone knows on what it depends that the ESS or PV assistant shifts the frequency In detail? In the assistant description https://www.victronenergy.com/live/assistants:pv-inverter-support it says that there are default limits, but I‘m using an 18S LFP battery system, with a max voltage of 64 V. The BMS of this battery is connected to the GX device and the min and max cell voltages are available, as also the CVL, CCL and DCL. DVCC is enabled. Will the assistant use this values or only the values configured with VE.Config in the charger tab?
