question

sbruno avatar image
sbruno asked

How do I get the ccgx to display the DC loads?

How do I get the ccgx to display the DC loads?

CCGX Color Control
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

This is in the CCGX Menu - System Setup - Has DC System - Yes/No.


Read the CCGX manual for the full list of Configurable parameters


1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

sbruno avatar image sbruno commented ·

Thank you!

0 Likes 0 ·
mihair avatar image
mihair answered ·

Hi Guy,


Do you have any idea why the DC isn't displayed on the following ESS system configuration? I have noticed that the DC rectangle is only displayed on CCGX screen when Multi is in OFF state


Thanks,

Mihai


dc-not-displayed.jpg (77.7 KiB)
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Kristof G. avatar image Kristof G. commented ·

Mihai,

i think its because you selected in the ESS menu "grid meter installed"


When you deselect it and "has DC system" is on... you will see it again.


grtz KG

0 Likes 0 ·