question

Minas Papageorgiou avatar image
Minas Papageorgiou asked

Old BlueSolar VE.Can MPPT compatibility with New SmartSolar VE.Can?

I have an old (2012) BlueSolar Charger 150V/70A (PN: SCC010070000).

I want to expand the system by buying another one in parallel connection but I see that the new hardware is different. Will they be compatible?

MPPT Controllers
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
JohnC avatar image
JohnC answered ·

Hi @m_papag

They will certainly work and charge properly paralleled together. And you can have varying sizes too.

'Compatibility' beyond that would need definition, and if you have special needs then perhaps tell us what you want to do.

6 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Minas Papageorgiou avatar image Minas Papageorgiou commented ·

I was told that to synchronize them they need to have the same hardware.

But even the shell has changed completely, so I imagine that the hardware is also different. So you mean I can buy a new Bluesolar 150/70 and use the RJ45?

Because I see that the new BlueSolar 150/70 does not have VE.Can bus, while my old one does have VE.Can

Therefore, which new BlueSolar should I buy to make parallel synchronized connection with my old one (PN: SCC010070000) ?


Thank You!


0 Likes 0 ·
Show more comments