question

rodney-abbott-buchanan avatar image
rodney-abbott-buchanan asked

Orion TR smart 12/12 30 manual Fig 4: engine detection override/BMS cable

section 4.5 page 10 figure 4 has image of cables/wire between switch poles and BMS. the image unfortunately is unclear. the cable appears to be a built Victron item, I do not see it in accessories/cables/products. Can someone clarify which specific cable item is pictured?

BMSorion-tr smartswitch
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
bathnm avatar image
bathnm answered ·

I asked the same question recently and the feedback I got was it doesn't exist and to use a relay which breaks the loop!

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

bathnm avatar image bathnm commented ·

It looks like a cable does exists now...

https://www.victronenergy.com/cables/orion-tr_isolated_dc-dc_charger_remote_cable

0 Likes 0 ·
bathnm avatar image bathnm bathnm commented ·

And it is new as the manual is dated early July!

0 Likes 0 ·