Bolt size an pitch on BMV712 shunt

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

andypop1 asked Mar 16, '20

I know the shunt uses m10 hex bolts, but what is the length and pitch.

BMV Battery Monitor

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2020-03-16T07:11:56Z

Guy Stewart (Victron Community Manager) answered · Mar 16, 2020 at 07:11 AM

Not the exact answer to your question, but here is a picture of the BMV bolt next to a calliper set to 10.00mm

img-3473.jpg (550.1 KiB)

img-0806.jpg (2.3 MiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2020-03-16T07:26:44Z

Matthias Lange - DE answered · Mar 16, 2020 at 07:26 AM

I would say it is 15mm long and standard ISO-261/262
https://en.wikipedia.org/wiki/ISO_metric_screw_thread
-> 1.5mm pitch

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 3 · 2020-03-16T07:43:55Z

dwmarine answered · Mar 16, 2020 at 07:43 AM

From memory the bolt is M10x16mm.

It suits one large lug approx. 3.0mm thick.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.