question

jess avatar image
jess asked

C10 or C20 setting in Victron connect

Hi, what battery settings are needed for the Victron connect (Multiplus 800). Should I put a C10 or C20 value?

battery capacity
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
JohnC avatar image
JohnC answered ·

Hi @Jess

The standard Victron algorithms that might use that would expect C20. But it's not cast-in-stone, and you could use whatever gives you the results you prefer.

Batt temperature affects it a lot too, but it might depend what you're doing with the response from that setting, and whether it gets temp compensated or not.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

justme avatar image
justme answered ·

The rate is re the battery not the device. How many ah is you bat at the 10c or 20c rate?

1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic