question

solarone avatar image
solarone asked

Mppt 100/30 no output

Hi

I have a blue solar mppt 100/30 and is outputting zero watts,the bulk charge light is solid blue but no current/wats into the battery

What could be wrong ?

Thanks

MPPT Controllers
dc25cbf6-892b-4317-a0f4-10d25734cd01.jpeg (163.9 KiB)
4 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

markus avatar image markus ♦♦ commented ·

This charger has no blade fuse, as far as I can remember, so what is your Absorption voltage set to?

If everything is set up right, maybe your charger is just broken...

1 Like 1 ·
markus avatar image markus ♦♦ markus ♦♦ commented ·

Or maybe it's too cold and the charger is charging lithium?

1 Like 1 ·
solarone avatar image solarone markus ♦♦ commented ·

Hi Markus

Thanks I’ll double check the settings

It’s charging a 100 ah agm battery from the 120 watt panel and day temps at the moment are about 30 degrees Celsius

Thanks

0 Likes 0 ·
Show more comments
1 Answer
solarone avatar image
solarone answered ·

I found the problem with this controller,the internal fuse had blown once replaced it’s all good again

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

fcriado avatar image fcriado commented ·

How did you change it? You did it yourself or had to send it back?

1 Like 1 ·
solarone avatar image solarone fcriado commented ·

As the unit was out of warranty I changed it myself.

The fuse is a 50 amp fuse (100/30) soldered to the board (looks like a very little midi fuse)

Be careful when taking the lid off as the stuff they use to seal the unit is stuck to the top a of the lid

1 Like 1 ·