Looking for advice on ability to have 2 strings of 5 x 25.6V for a total of 10 in the same system configuration. There are 2 Quattros 8kVA. We have Cerbo GX as part of install.
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Looking for advice on ability to have 2 strings of 5 x 25.6V for a total of 10 in the same system configuration. There are 2 Quattros 8kVA. We have Cerbo GX as part of install.
@Justin Cook - Bay Marine Supply USA Thanks for your time on the phone.
@safiery thanks for reaching out! I'll point some people to this question from my other communication channels and I'm sure someone will have some valuable insight.
Also, I've converted your answer to a comment so that your question shows up as unanswered still :)
According to the VE.Bus BMS datasheet this configuration is not possible. Datasheet says a maximum of four batteries in series I read this as four 12.8V batteries for a maximum of 16 cells in series, so only two 25.6V batteries in series to make up a 48V system.
Also, datasheet says it's maximum Voltage is 70V.
https://www.victronenergy.com/upload/documents/Datasheet-VE-Bus-BMS-EN.pdf
EDIT:
If, by a "string", you mean a set of five 25.8V batteries in parallel, then yes, that is possible for one VE.Bus BMS. Then you can have the other parallel set with its own VE.Bus BMS.
Afterwhich, you can connect these two sets in parallel to maintain a 25.8V system Voltage.
Additional resources still need to be added for this topic
13 People are following this question.