question

phasor avatar image
phasor asked

How do I set up an Orion TR Smart 12/12/30

I have a ford transit custom van with a euro 6 engine/ smart alternator. I want the orion to start charging my leisure batteries automatically once the engine is running and to stop once the engine is turned off. What settings will I need to set? I have three 100AH lithium Batteries.

orion-tr smart
2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

jildeyo avatar image jildeyo commented ·
Hello… My name is Jacques.

I am having trouble with my Orion B to B charger also. (Engine shut down detected) I was wondering if you have come up with a solution and are willing to share your settings. It would be greatly appreciated! Thank you

0 Likes 0 ·
jildeyo avatar image jildeyo commented ·
I forgot one important aspect of my set up… I am connected to the CCP connection point on the driver seat pedestal
0 Likes 0 ·
1 Answer
Justin Cook avatar image
Justin Cook answered ·

Hello @Phasor, please see the Orion-Tr Smart User Manual for the answers to your questions; pages 1,2, and 3 directly address your use-case although of course you should also read the rest of the manual as well.

5 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

phasor avatar image phasor commented ·

Thank you Justin. I have read through the manual. Is it as simple as setting a turn on voltage and turn off voltage I do not want to use any connection to the ignition. do i set the input voltage lock-out or use the engine detection voltage settings or both?


regards,

Phasor

0 Likes 0 ·
Show more comments