question

bora avatar image
bora asked

Multiplus 2nd Output - Only active when connected to a 240v source?

Hi,

I'm looking to install a multiplus 3000 on my yacht, i see there are 2 outputs from the unit, does anyone know if they can be configured so that one of them is only active when connected to shore power or the generator?

My calorifier and battery chargers are currently on the circuit that comes from the gen/shore power so i don't want the inverter to be putting power out on the 2nd output when i'm just on batteries.

Hope that makes sense....

Multiplus-IIGeneratorshorepower
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
ejrossouw avatar image
ejrossouw answered ·

Hi @Bora. AC2 out is only active when there is mains/generator and is basically a passthrough. All critical loads should be connected to AC1OUT.

I hope this helps.


2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

bora avatar image
bora answered ·

Fantastic!! that's exactly what I was hoping for. Thanks for your help.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.