question

leftishut avatar image
leftishut asked

Where/how do I connect the Ve.Bus Smart dongle to the 24/1200 Phoenix inverter?



I am finally installing my solar setup. I am running 2 inverters. One 24/3000/70-50/120v multiplus for heavy loads kitchen and tools. Also a Phoenix inverter ve.dirrect 24/1200 for security cameras, minisplit and laptops.

On victron a website it shows the Ve.Bus Smart dongle as options for both units so I bought 2.

Where/how do you make the rj45 connection on each unit?

(Side questions: the multiplus came with a tsense cable. Can I instal that to its ve.bus instead?

How many temperature sense cables would you run? I can buy more. I have the option from the Ve.bus x2, the bmv712smart and the 24/300.)


Thank you al very much.

VE.Bus Smart Dongle
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·
3 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

leftishut avatar image leftishut commented ·

This is dirrectly off victron site:

“The VE.Bus Smart dongle is two products in one:


First of all it is the bluetooth accessory for our range of inverter/chargers: Multis, MultiPlusses, MultiPlus-II, MultiGrid, MultiGrid-II, Quattros, and our series of Phoenix Inverters with a VE.Bus port. When installed, use the VictronConnect app to monitor operation and also operate the system: change the input current limit as well as switch between Off, On and Charger-only modes.”


I am so confused. I spent endless hours trying to pick out the correct components (taking few shortcuts, maxing out budget). And I ended up with the wrong products?

0 Likes 0 ·
Show more comments

Related Resources

Additional resources still need to be added for this topic