question

gavin-andrews avatar image
gavin-andrews asked

EasySolar; can the battery temperature sensor from the charger be used to compensate the BMV SoC?

I have an Easysolar 48/5000/70-100 with CGX and seperate BMV 702.

I notice that there is an installed battery temperature sensor to the EasySolar, and I assume that is part of the charger (it is not the optional BMV one). I would like to know if it is possible to configure the system so that that temperature information feeds the BMV state-of-charge calculation?

BMV Battery Monitortemperature compensation
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Stefanie (Victron Energy Staff) avatar image
Stefanie (Victron Energy Staff) answered ·

Hi @Gavin Andrews,

not sure I understand your question correct. But the temperature information, be it from the EasySolar or the BMV, has nothing to do with SoC calculation.

SoC highly depends on measuring charge and discharge energy in and out of the batteries.

3 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

gavin-andrews avatar image gavin-andrews commented ·

My layman's understanding is that battery capacity is affected by temperature. SoC is expressed as a percentage of capacity.

0 Likes 0 ·
Show more comments

Related Resources

Additional resources still need to be added for this topic