question

thomaskjerulff avatar image
thomaskjerulff asked

BMS 12/200 will not turn on

OK, I hooked up my brand new right out of the box BMS 12/200 to my brand new right out of the boxes 150AH Victron smart lithium batteries, wired exactly as depicted and wired in the sequence indicated and I am only getting 12.3 volts on the AB side and only 12.7 volts on the LB side. No current to speak of, nothing runs. I took every thing apart thinking somehow the micro processor needed to be reset somehow and again hooked everything back up and no joy. Before I send this thing back and demand another I need to trouble shoot it and there is squat on that in the literature. Just this Victron community thing where a question may or may not be answered. I have a few unanswered questions out there still.

BMS
3 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Paul B avatar image Paul B commented ·

Please supply a wiring diagram of how you have set this up and some pictures of the instalation,

0 Likes 0 ·
Show more comments
1 Answer
thomaskjerulff avatar image
thomaskjerulff answered ·

Wow aren't I stupid. That was the problem and it works great. Thank you!

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.