question

coltarkdm avatar image
coltarkdm asked

Incorrect Shunt Connection?

It is very clear that there should only be one connection from the negative battery terminal to the supply side of the shunt. That said, the installation diagram for my Victron Multiplus 3000/70/24 indicates that the T-Sense cable should be run from the negative battery terminal to the T-Sense input on the Multiplus and that is how I wired it. Now I'm thinking that is incorrect and that the cable should be connected to the load side of the shunt. Ever since I completed my solar install, I haven't felt like my BMV712 has been displaying correct SOC and I'm hoping this change might help. What do you think? I have 4-100ah Battle Born in 24v configuration..

BMV Battery Monitor
1582908229969.png (5.3 MiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Stefanie (Victron Energy Staff) avatar image
Stefanie (Victron Energy Staff) answered ·

No. It's correct the way you wired. The T-Sense has nothing to do with SoC.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

coltarkdm avatar image coltarkdm commented ·

Thank you Stefanie!

0 Likes 0 ·
Daniël Boekel (Victron Energy Staff) avatar image
Daniël Boekel (Victron Energy Staff) answered ·

Hi @ColtarKDM

What are the settings in you BMV? (peukert factor and charge efficiency)

7 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

coltarkdm avatar image coltarkdm commented ·

Thanks for helping me. Here are my settings.

0 Likes 0 ·
b8c55ccb-d795-4345-ba59-f52df0126af7.png (379.6 KiB)
Daniël Boekel (Victron Energy Staff) avatar image Daniël Boekel (Victron Energy Staff) ♦♦ coltarkdm commented ·

ok, and in what way is the SOC incorrect? is it too high or too low? or does it reset to soon?

0 Likes 0 ·
Show more comments

Related Resources

Additional resources still need to be added for this topic

Victron BMV battery monitors product page