I do not seem to find the spec on the cable length for the new GX Touch Display. Any info?
IF to short for the application cable looks Like and HDMI and a USB conbined cable. Can we use extender?
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
The cable is about 2m long. HDMI and USB should be extendable ( no official statement).
Any suggestion (unofficially) on extension options or best practice?
@Jmarc@aeandmengineering.com we have successfully installed 10m extensions of both the HDMI and USB
@safiery, did you need to use HDMI/USB signal boosters, or just standard extensions?
Used Ethernet over HDMI cable. Two of the HDMI pin outs are for the Touch function. No repeaters needed.
I seem to remember reading somewhere the cable is NON-extendable. I can not find that detail now. 78inches is too short for me, so a deal breaker. If extendable, I'll reconsider
..just to verify: if you look into the GX50 product page, at the bottom of the 'notes' section, it clearly states the fixed GX50 cable is non-extendable. that is unfortunate.
Note that some HDMI over ethernet systems compress the data which is sort of OK for video but artifacts on computer graphics and characters can be significant.
Additional resources still need to be added for this topic
21 People are following this question.