question

jess avatar image
jess asked

How do I update Firmware on Multiplus 12/800/35?

Hi, the image from inside is stating Firmware 2661430.VFD. This couldn't be found on the Firmware updates page. Which version should I use and why is the firmware ending with VFF on the site? S/N HQ1911G****

MultiPlus Quattro Inverter Charger
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Alexandra avatar image
Alexandra answered ·

If you use Victron Connect it will find the correct firmware for you and update it. Much easier for the end user and less chance of errors.

https://www.victronenergy.com/support-and-downloads/software


https://docs.victronenergy.com/victronconnect-vebus.html#firmware-updates


I am assuming you already have equipment for connecting to the Inverter for the update.

4 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

jess avatar image jess commented ·

Hi, I did the setup already; not sure about the update and whether the version I supplied is the latest?

0 Likes 0 ·
jess avatar image jess commented ·

The Victron Connect will only update the Connect software not the device.


0 Likes 0 ·
Show more comments